Model 2130 Fluxmeter

Description

The Model 2130 Fluxmeter is a fully featured, high-end Fluxmeter based measurement system. It is a compact instrument with high accuracy, automatic drift correction, microprocessor control, and twelve measurement ranges to allow the operator to configure the meter for maximum resolution and accuracy. The Model 2130 is capable of measuring (DC), alternating (AC), or pulsed magnetic fields. Selecting primary measurement functions is quick and easy with dedicated front panel function keys. An easy to use menu allows access to user defined parameters such as upper and lower magnetic limits and relative magnetic measurements. Remote meter configuration is completely accessible using the built in RS-232 Interface or optional IEEE-488 Interface. It provides measurements in five (5) different units over twelve (12) measurement ranges. The ability to select measurements in Maxwell, Maxwell Turns, Gauss, Tesla, and Bdi Gauss make this unit ideal for both production and laboratory/research testing. The most frequently used functions are accessed using front panel pushbuttons while more complex functions are selected by way of a user friendly menu system and function select entry. For example, Helmholtz Coil constants and magnet volume can be manually entered from the front panel and stored in memory to provide readings directly in Bdi Gauss. Probe/Coil parameters, such as the number of turns and area (NA), resistance and Helmholtz constant, can also be stored in look-up tables for easy reference and future setups. This feature saves time and reduces the chance of errors in converting readings manually.

Magnetic Instrumentation offers a wide selection of both standard and custom Helmholtz Coil Systems and Search Coils to measure many different magnet sizes and configurations.

Features

High Accuracy
Low Drift With Automatic Drift Correction
12 Measurement Ranges
Single Button Zeroing and Calibration
Measurement Functions AC, DC, Peak
Modes: Normal, Limits, & Relative
High Resolution (1 part in 32,000)
Measurement Unit Selection; Maxwell, Maxwell Turns, Gauss, Tesla or Bdi Gauss

User Select Sampling Period 100ms to 2.5 Seconds
Compact Size
32 Character Backlit Display
External Reset
Factory Set Default Mode
Analog, Dual Limit HI/GO/LO – TTL andRS-232 Outputs Standard
IEEE-488 Interface Option
3.5″ Rack Mount Option

Specifications

Function	Range	Typical	Maximum	Conditions
Normal (DC)	10⁵-10⁸	.050	.100	–
AC (RMS)	10⁵-10⁸	.500	1.000	20Hz-30HZ
AC (RMS)	10⁵-10⁸	.300	.700	30Hz-1kHz
Max Hold (Peak)	10⁵-10⁸	.300	.800	³Pulse Width*
Analog Output	10⁵-10⁸	.150	.400	Specification is for the deviation of the analog output compared to the Model 2130 display value

* Certified at a 1ms pulse, however it impulses fields as fast as 100 microseconds can be measured, if the input voltage range is not exceeded. Average Time Constant (display rate): This interval may be set from 100 ms to 2500 ms, in 100 ms intervals (0.4 to 10 times per second). Display Resolution: 4 3/4 Digits (1 part out of ± 32,000). Operating Temperature Range: 0°C to +50°C

Storage Temperature Range: -20°C to +70°C

Maximum Resolution: 10 Maxwell Turns on 105 range

Humidity: 0 to 68%

Analog Output: 1 Volt ± 0.25% of full scale

Power Requirements: 110 VAC, 220 VAC @10W, or ±9 VDC @5W Operation Dimensions: Length 12.00 In. (305 mm), Width 6.70 In. (170 mm), Height 2.25 In. ( 57 mm), Approximate Weight: 6 Lbs. (2.7 kg)

*Specifications subject to change without notice